Home News How to choose the right plasma cutting machines

How to choose the right plasma cutting machines

5 Factors to Consider When Choosing a Plasma Cutter

There are some critical factors that you need to put into consideration when you are buying a plasma cutting tool. Some of these factors include ease of use, reliability, and cut quality among others. However, you should first establish what type of cutting you want to achieve. Whether you are putting on a table or planning to cut by hand are essential factors to consider. It is common knowledge that some machines can do both. You will find a plasma cutter that can work as a mechanized tool while others work as handled tools and end up performing efficiently.


  • The thickness of the Material

    The thickness of the material that you intend to cut should be considered. The rule of the thumb dictates that you should select a machine that has the cutting capacity of the material thickness you want to cut. In most of the time, you should consider choosing a tool that has more than 80% cut-capacity, especially when you are using a handled machine. It is possible to find plasma cutters that can fail to cut a particular thickness, especially when the cutting capacity falls below 75%. Mechanized plasma cutting machines have enough power to cut a thick material as compared to a manual device.

  • Cutting Quality

    Cut quality is one of the most critical factors that you should consider every time you are buying a plasma cutter. Quality cutting has a significant impact on the quality of the finished product while at the same time impacting later stages of production. You want to get a well-cut piece that has smooth and clean edges. This will make sure that you don't spend much time preparing the same piece in the later stages of production. The smooth and clean cutting means that there is a narrower cut width, which means that there is less wasted material.                             

  • Reliability

    Reliability is another important consideration when you are purchasing plasma cutters. You should make sure that an ISO certified company manufactures your cutting system and that it meets the ISO standards. A reliable machine can easily be detected because it uses more software than hardware. Heating is a critical aspect of the cutting machine, which means that you should consider plasma cutting machines that have an effective cooling system. For example, a centralized fan that will help in bringing the air through the central system where heat-sensitive equipment is located. Continuous cooling will enable the system to perform excellently and higher reliability.   

  • Ease of Use

    It is common knowledge that one plasma cutting machine can be easy to use as compared to another one of a similar category. Ease of use allows the operator to perform the work efficiently and use the minimum time possible to perform a particular task. People with minimum experience can also be able to work with an efficient machine and get good results. You should make sure that you purchase a machine that can be used by any person, regardless of experience. Taking a long time to complete a particular task can be considered as a loss to an organization that is working towards a specific objective.

  • Size and Weight

    Size and weight are important factors that should be considered, especially by individuals who tend to move a lot in their workshop. Recent advancement in technology has allowed individuals to get a quality plasma cutting machine that is lightweight without sacrificing power and performance. A lightweight plasma machine can easily be carried from one corner of the workshop to the other. It is also clear that you can get a plasma cutter that can automatically adjust voltage, which is an important aspect, especially if you are planning to use a generator.